Area and Volume Calculator
Area, perimeter, surface area and volume for common 2D and 3D shapes, with the formula and each step
100% free. Runs entirely in your browser - your files and data never leave your device and nothing is uploaded to any server.
- Choose 2D or 3D and a shape
- Enter the sizes in one unit
- Read the area, volume and formula
Your numbers
Shape and unit
Dimensions
Result
20.000 m²
Breakdown
| Area | 20.000 m² |
|---|---|
| Perimeter | 18.000 m |
| Area in m² | 20.000 m² |
| Area in ft² | 215.278 ft² |
| Area in cm² | 200,000.000 cm² |
How this was calculated
- Area = length × width = 5 × 4 = 20.000 m².
- Perimeter = 2 × (length + width) = 18.000 m.
Area, perimeter, surface area and volume calculator
Calculate the area and perimeter of rectangles, squares, triangles, circles, trapezoids and parallelograms, or the volume and surface area of cylinders, spheres, cones, cubes and cuboids. Each shape has its own labelled inputs, the formula and steps are shown, and results are converted to square or cubic metres, feet and more.
How to use this tool
- Choose 2D or 3D2D shapes give area and perimeter; 3D shapes give volume and surface area.
- Pick the shape and unitChoose from 11 shapes and millimetres, centimetres, metres, inches, feet or yards.
- Enter the dimensionsThe fields match the shape, such as base and height for a triangle or radius and height for a cylinder.
- Read the results and stepsSee the main answer, conversions and the formula with your numbers filled in. Set the decimal places to suit.
Area and perimeter formulas
- Rectangle: area = length × width; perimeter = 2 × (length + width).
- Square: area = side²; perimeter = 4 × side.
- Triangle: area = ½ × base × height; perimeter = sum of the three sides.
- Circle: area = π × r²; circumference = 2 × π × r.
- Trapezoid: area = ½ × (base 1 + base 2) × height.
- Parallelogram: area = base × height; perimeter = 2 × (base + slanted side).
Volume and surface area formulas
- Cylinder: volume = π × r² × h; surface = 2πr(r + h).
- Sphere: volume = 4/3 × π × r³; surface = 4 × π × r².
- Cone: volume = ⅓ × π × r² × h; surface = π × r × (r + slant height).
- Cube: volume = a³; surface = 6 × a².
- Cuboid: volume = l × w × h; surface = 2(lw + wh + hl).
Checks for impossible shapes
If you give all three triangle sides, each must be shorter than the other two combined, and the height must match those sides. Trapezoid legs must be at least the height and must fit the difference between the bases. The calculator tells you when the measurements cannot form the shape.
Key features
- Area, perimeter or circumference for six 2D shapes.
- Volume, total surface and lateral surface for five 3D shapes.
- Area in m², ft² and cm²; volume in m³, ft³ and litres.
- Checks impossible inputs such as triangle sides that cannot meet.
- Formula and working shown for every result.
Common uses
- Room floor area for flooring, tiles or carpet.
- Garden beds, lawns and paving areas.
- Tank, pipe and container volumes in litres.
- Geometry homework with step-by-step checks.
- Material estimates before using the concrete calculator.
Tips for better results
- Use the height measured at right angles to the base for triangles, parallelograms and trapezoids.
- Add the optional side lengths to get the perimeter of a triangle, trapezoid or parallelogram.
- For tanks, read the volume in litres.
- Keep every dimension in the same unit.
Mistakes to avoid
- Using a slanted side as the height of a triangle or parallelogram.
- Entering a diameter where a radius is asked for.
- Squaring units incorrectly when converting area by hand.
- Giving trapezoid legs that cannot fit the two bases and height.
Frequently asked questions
Multiply length by width. A 5 m × 4 m room has an area of 20 m² and a perimeter of 18 m.
Multiply the base by the perpendicular height and halve it. A base of 6 and height of 4 gives 12 square units.
Multiply π by the radius squared. A radius of 3 m gives about 28.27 m².
Half the sum of the two parallel sides times the height: ½ × (10 + 4) × 4 = 28.
π × radius² × height. A radius of 1 m and height of 2 m gives about 6.28 m³, or 6,283 litres.
4/3 × π × radius³. A sphere with radius 1 has a volume of about 4.19.
One third of π × radius² × height. A cone with radius 3 and height 4 has a volume of about 37.70.
The curved or side surface without the top and bottom, for example the side of a cylinder, 2πrh.
Multiply by 0.0929. The calculator shows every area in m², ft² and cm² automatically.
Each side must be shorter than the other two added together, and the height you entered must match the sides. The message tells you what the height should be.
Yes. Everything is calculated in your browser.