Concrete Calculator
Concrete volume for slabs, footings, walls, columns and stairs, with waste allowance, bag estimates and a multi-element project total
100% free. Runs entirely in your browser - your files and data never leave your device and nothing is uploaded to any server.
- Pick a shape and enter its size
- Set the waste allowance and, if you buy bags, the bag yield
- Read the volume to order, or add more elements
Shape and size
Pick a shape, enter its size, then add it to the project if you are pouring more than one element.
Waste and bags
0 to 30%. 5 to 10% is common.
Printed on the bag of the product you buy.
Concrete to order
1.260 m³
1.65 yd³ · 44.5 ft³
Formula: Volume = length × width × thickness
Step by step
- Slab: 4.000 × 3.000 × 0.100 m = 1.2000 m³.
- Waste allowance 5%: 1.200 + 0.060 = 1.260 m³.
Unit conversion reference
| 1 m³ | = 35.31 ft³ = 1.308 yd³ |
| 1 yd³ | = 27 ft³ = 0.7646 m³ |
| 1 ft³ | = 0.02832 m³ |
How this concrete calculator works
Each element's volume uses the formula for its shape, the project total adds them, then the waste allowance is added. Stairs use a suspended-stair takeoff: an inclined waist slab plus the triangular steps; complex staircases need a detailed takeoff.
All figures are approximate. Reinforcement, formwork, structural design and site conditions are not included, and no cement, sand or aggregate mix ratio is assumed. Everything runs in your browser.
Concrete calculator for slabs, footings, walls, columns and stairs
Work out how much concrete to order in cubic metres, cubic feet and cubic yards. Choose a slab, footing, wall, round or rectangular column, or a staircase, enter the sizes in metres or feet, add a waste allowance, and optionally the yield of the bagged concrete you buy to get the number of bags. Add several elements to one project to get a combined total.
How to use this tool
- Pick the shapeSlab, footing, wall, round column, rectangular column or stairs. The input fields and the preview change to match.
- Choose metres or feet and enter the sizesUse the same unit for every measurement. For stairs, enter the total width, total run, total rise, waist slab thickness and the number of steps.
- Set the waste allowanceBetween 0 and 30%. 5 to 10% is common for a level slab; use more for uneven ground.
- Add the bag yield if you buy bagsEnter the yield printed on the bag in m³ or ft³, and optionally the product name, to get the number of bags.
- Add elements to a projectPress Add to project for each pour. Edit or remove elements and the project total updates; it is saved in this browser.
Concrete volume formulas
- Slab: length × width × thickness.
- Footing: length × width × depth.
- Wall: length × height × thickness.
- Round column: π × (diameter ÷ 2)² × height.
- Rectangular column: length × width × height.
- Stairs: width × (slope length × waist thickness + run × rise ÷ (2 × number of steps)), where slope length = √(run² + rise²).
Cubic yards, cubic feet and cubic metres
1 m³ = 35.31 ft³ = 1.308 yd³, and 1 yd³ = 27 ft³ = 0.7646 m³. A 20 ft × 12 ft slab that is 6 inches thick is 120 ft³, which is 4.44 yd³ or 3.40 m³.
What the estimate does not include
Results are approximate volumes. Reinforcement, formwork, structural design and site conditions are not included, and no cement, sand or aggregate mix ratio is assumed. Ask your supplier or engineer for the mix and strength you need.
Key features
- Volume in m³, ft³ and yd³, the units suppliers quote.
- Base volume, waste allowance and total shown separately.
- Bag count rounded up, using your own product's yield.
- Multi-element projects with a per-element breakdown chart.
- Suspended-stair formula with the waist slab and steps counted.
- Download the estimate as CSV or text, or print it.
Common uses
- Ordering ready-mix for a patio, driveway or garage slab.
- Estimating footings and columns for an extension.
- Counting bags of premix for fence posts or a small pad.
- Pricing a staircase pour.
- Comparing quotes with a total for the whole job.
Tips for better results
- Measure thickness carefully: 10 cm instead of 12 cm changes the volume by 20%.
- In feet, enter thickness in feet too: 4 inches is 0.333 ft.
- Use one project element per pour of a different shape.
- Round up when ordering ready-mix; running short mid-pour is costly.
- Check the bag yield on the label; it varies by product and bag size.
Mistakes to avoid
- Mixing inches and feet in the same element.
- Forgetting the waste allowance for uneven sub-base or spillage.
- Using diameter as radius for a round column (the calculator asks for diameter).
- Assuming a bag yield instead of reading the product label.
- Treating the estimate as a structural design; it does not include reinforcement or formwork.
Frequently asked questions
Multiply length × width × thickness in the same unit. A 4 m × 3 m slab 0.1 m thick needs 1.2 m³ before waste, about 1.26 m³ with 5% waste.
Work out cubic feet (length × width × thickness in feet) and divide by 27. The calculator shows yd³ for you.
Divide the volume to order by the yield of one bag from the product label, and round up. Enter the yield in m³ or ft³ and the calculator does the division.
Most people add 5 to 10% for spillage and uneven ground. You can set anything from 0 to 30%.
Use π × radius² × height, where the radius is half the diameter. A 0.4 m diameter column 3 m high is about 0.377 m³.
As a suspended stair: an inclined waist slab plus the triangular steps on top. Enter total width, run, rise, waist thickness and the number of steps. Complex stairs need a detailed takeoff.
Yes. Add each element to the project; the total, waste and bags are worked out for the whole project, and each element is listed separately.
Choose feet and enter every size in feet. Convert inches by dividing by 12, so 4 inches is 0.333 ft.
No. Mix ratios depend on the strength you need and the product, so none is assumed.
The project elements are saved in this browser only, so they are still there after a reload. Nothing is sent to a server.